Changelog

2.0.5.6 (2026-07-22)

  1. Fix abnormal issue with hidden shortcut keys
  2. Fix remaining stock setting check
  3. Fix parameter refresh issue after tool change
  4. Correct spark gap setting for flat-end mill roughing
  5. Optimize tool types in tool library
  6. Add horizontal plotting output function for post-processing
  7. Fix duplicate name error when copying
  8. Adapt programming after tool library optimization
  9. Optimize placement layer for surface-raised sheet bodies
  10. Fix issue where copying blank copies all operations
  11. Fix conflict when creating sheet bodies with multiple surface raises
  12. Fix incorrect layer setting during roughing
  13. Add analysis and coloring for datum plane and datum side
  14. Complete electrode logic update to reduce errors
  15. Add localization translations

2.0.5.5（2026-07-14）

  1. Optimize machine tool selection for post-processing
  2. Electrode material configuration
  3. Composite electrode
  4. Fix false positive in automatic analysis
  5. Fix tool not displaying correctly
  6. Add trim boundary function
  7. Fix error when switching application modules
  8. Replace programming window tool library control; remember last used tool library after switching
  9. Resolve interface issues in English environment
  10. Group name setting now takes effect
  11. Add entity validation to prevent crash when no electrode entity exists

2.0.5.4(2026-07-10)

  1. Optimize machine tool selection for batch post-processing
  2. Optimize overcut detection
  3. Optimize electrode material handling
  4. Optimize part spotting
  5. Fix cutting depth setting issue in cutting layer
  6. Optimize logic for feed point update point

2.0.5.3（2026-07-07）

  1. Implement operation selection strategy logic
  2. Implement batch editing for machining plans
  3. Optimize part centering function
  4. Fix error caused by tool mismatch
  5. Support adding multiple same-type operations to a machining plan
  6. Supplement and optimize tool cutting parameters
  7. Apply tool parameters to operations
  8. Add steep/non-steep wall demarcation angle configuration
  9. Optimize A Niu Programming icons
  10. Enhance operation group functionality with support for creating new operation groups
  11. Add temporary tool function
  12. Add spark gap setting for operations
  13. Support renaming operations
  14. Support generating preview for individual operations
  15. Fix naming conflicts during batch copy
  16. Add read-back function to read NX plan operations back into A Niu Programming
  17. Add right-click menu option to add operations
  18. Add batch tool change and reference tool functions for operation groups
  19. Add semi-finish to operation groups
  20. Optimize tool selection; double-click to open tool change page
  21. Fix issue where electrode attribute working layer was read incorrectly
  22. After completing electrodes, fine-tune operations and regenerate rough/finish programs
  23. Support automatic conversion from Entu attributes to A Niu Programming attributes
  24. Fix issue where cutting depth stepover did not take effect
  25. Improve programming datum face recognition logic
  26. Add automatic import for external electrodes
  27. Optimize post-processing
  28. Optimize BOM upload for special-shaped electrodes
  29. Electrode material date configuration
  30. Improve dynamic attribute functionality
  31. Surface raising now automatically adds sheet body to operation components
  32. Optimize programming interaction logic
  33. Fix overcut check
  34. Add manual modification function for material list

2.0.5.2(2026-06-03)

  1. Optimize A Niu Programming icons and interface
  2. Optimize machining plan display
  3. Add top kill surface height and datum protection allowance for programming
  4. Optimize programming button availability logic
  5. Add font size, color, balloon size, and color settings for batch measurement reports
  6. Optimize preset configuration function
  7. Optimize auto-execution chain; add dropdown enum configuration; add sync upload; upload BOM after electrode info modification
  8. Optimize electrode post-processing
  9. Add reference tool function
  10. Supplement and modify electrode attributes for auto-upload
  11. Fix electrode material handling
  12. Auto-save when generating program sheet
  13. Initial version of label visualization
  14. Fix import/export exceptions in tool library and subsequent optimizations
  15. Improve visualization configuration
  16. Optimize tool length calculation in program sheet
  17. Auto-save configuration for program sheet
  18. Optimize part naming
  19. Add fool-proofing for multi-tooth electrodes; fix multi-tooth electrode functions
  20. Support batch copy, delete, and tool change for programming and machining plans
  21. Add function to display electrode numbers
  22. Click on programming interface to modify operation parameters
  23. Add cutting parameters to tool library; support batch modification in tool library
  24. Batch modify tools and reference tools in programming
  25. Configurable tree view in programming page
  26. Allow configuring electrode working layer in settings

2.0.5.0(2026-04-30)

  1. Optimize program sheet functions
  2. Add composite electrode function
  3. Optimize batch spotting function
  4. Optimize tool creation and related functions in tool library
  5. Re-upload steel/electrode program sheets to FTP with optimizations
  6. Add projected area function for single-tooth electrodes
  7. Add machining plan function
  8. Add electrode analysis function
  9. Optimize mirror component function
  10. Add electrode engraving function
  11. Add A Niu Programming function
  12. Add preset configuration function
  13. Optimize post-processing and post-processing filtering
  14. Optimize multi-tooth electrode functions
  15. Add steel part screenshot function

2.0.4.9 (2026-03-02)

  1. Optimize assembly support for editing special-shaped electrodes
  2. Optimize assembly support for electrode information

2.0.4.8(2026-02-25)

  1. Optimize electrode contact surface analysis
  2. Add part repositioning
  3. Optimize automatic stylus change for measurement points
  4. Optimize datum base removal
  5. Add creation of program groups
  6. Add Z-height for multi-tooth electrodes

2.0.4.7(2026-01-23)

  1. Optimize electrode spotting function

2.0.4.6(2026-01-16)

  1. Optimize TopZ in discharge drawing
  2. Optimize upload for electrodes larger than 10MB
  3. Add configurable default tolerance for datum base

2.0.4.5（2026-01-09）

  1. Optimize electrode attributes

2.0.4.4(2026-01-07)

  1. Fix bugs in electrode program sheet
  2. Add support for reading Hisense electrode attributes
  3. Optimize stylus change for spotting

2.0.4.3 (2025-12-23)

  1. Optimize program sheet
  2. Add configuration to import expressions for replacing other electrode materials
  3. Add CMM automatic stylus change configuration for electrode picking

2.0.4.2 (2025-12-13)

  1. Rough/finish integrated check for electrode picking
  2. Sort electrode information numbers
  3. Optimize material quantity submission for rough/finish integrated electrodes
  4. Optimize hiding workpiece in drawing output
  5. Hide parts for multi-tooth electrode station settings
  6. Add configuration for exported electrode rotation angle
  7. Optimize system configuration reading

2.0.4.1 (2025-12-03)

  1. Fix bugs in shared electrode drawing output
  2. Fix bugs in automatic electrode angle labeling
  3. Optimize contact surface analysis for multi-tooth electrodes
  4. Add coordinate shift configuration for multi-tooth electrodes
  5. Fix bugs in electrode spotting
  6. Optimize stylus from layer 150 to 240
  7. Add configuration for undercut face picking in electrode spotting

2.0.4.0 (2025-11-26)

  1. Add configuration to exclude wire-cut electrodes from batch picking
  2. Change discharge drawing angle display to counterclockwise
  3. Exclude part entities on layers greater than 256
  4. Default to enabling multi-tooth electrode configuration
  5. Optimize multi-angle C-angle leader lines
  6. Add angle labeling for angled gate electrodes
  7. Do not engrave if electrode engraving face is smaller than 16mm
  8. Add prompt when electrode size exceeds standard specification

2.0.3.9 (2025-11-19)

  1. Multi-tooth electrodes support drawing output for multiple workpieces together
  2. Add face selection to coordinate management entity selection
  3. Add default checked configuration for PDF export
  4. Fix bugs in electrode discharge angle

2.0.3.8 (2025-11-18)

  1. Multi-tooth electrodes support individual discharge direction for each station
  2. Display part orthographic view in drawing configuration options
  3. Optimize electrode engraving tolerance
  4. Optimize multi-tooth electrode drawing output
  5. Synchronize touch-point faces for multi-tooth electrode drawing output across same workpieces
  6. Configure spark gap inheritance from datum base spark gap for multi-tooth electrodes

2.0.3.7 (2025-11-04)

  1. Update the engraving number for mirror electrodes
  2. Optimize the export of empty STP drawings for NX2506
  3. Adjust the exported material list back to the weight of rough materials
  4. Change the deletion of nodes in electrode drawing output to batch deletion
  5. Adjust the export of 3D: if the file already exists, it must be overwritten for normal export
  6. Optimize the issue where the customer number is lost during the secondary initialization of project initialization

2.0.3.6 (2025-10-31)

  1. Add electrode configuration; check the box to default that the spark gap has been deducted from the body
  2. Add standard material specification configuration for electrodes
  3. For electrode drawing output, the default option for electrode contact surface analysis checks interference inspection
  4. Add login verification to server configuration
  5. Electrode BOM table remarks + processing remarks + EDM remarks
  6. Optimize the exclusion of R angles in electrode point extraction
  7. Optimize the distribution of electrode point extraction
  8. Add file saving configuration for drawing output

2.0.3.5 (2025-09-30)

  1. Add tool split body
  2. Add tool rib reinforcement
  3. Add tools for STP, X_T, and conversion to Prt
  4. Add tool hole bottom clearance
  5. Add tool top surface replacement with plane
  6. Add tool flatten curve
  7. Prompt for eccentricity of the workpiece center in drawing output
  8. Optimize the export of drawings

2.0.3.4 (2025-09-26)

  1. Add the general assembly drawing of the EDM list
  2. Optimize the distribution of electrode sampling points
  3. Add the export of a single CAM Stp

2.0.3.3 (2025-09-23)

  1. Add 2 specified settings for point color selection
  2. Optimize the prompt sequence for automatic point selection
  3. Optimize the STP export bug

2.0.3.1 (2025-09-19)

  1. Optimization of the Bug in the Height of the Electrode Dotting Reference Plane
  2. Adding the output of the buckle label to the electrode drawing
  3. Optimization of the BUG in setting the spark gap for multi-tooth electrodes

2.0.3.0 (2025-09-18)

  1. Optimization of discharge parameters for lost hanging reference platform
  2. Optimization of spark positions for multi-tooth electrodes
  3. Optimization of the prompting sequence for electrode point selection

2.0.2.9 (2025-09-15)

  1. The electrode list displays multi-station spark gaps
  2. Measurement report plotting in batches + automatic plotting

2.0.2.8 (2025-09-13)

  1. Add electrode measurement report plotting
  2. Import electrodes and optimize the selection of datum planes
  3. Optimize the BUG where the saved configuration of enumeration options does not take effect
  4. Display spark gaps in multi-tooth electrode drawings

2.0.2.7 (2025-09-08)

  1. Optimization of the BUG where exporting PDF reports a CGM path error
  2. Optimization of the BUG where exporting STP results in an extra 90-degree entity

2.0.2.6 (2025-09-05)

  1. Import of other electrodes: add Xingchuang and Jinyu, and optimize
  2. Update of electrode program sheet: optimization of single program
  3. Optimization of part naming selection
  4. Coordinate management: cancel the default coordinate
  5. Optimization of drawing output for multi-tooth electrodes
  6. Optimization of prompt for manual point selection in inspection
  7. Optimization of abnormal point exclusion in drawing output
  8. Modify the export of STP to background output
  9. Optimization of benchmark platform engraving
  10. Configuration of spark gap type options
  11. Modify the export of PDF to background output
  12. Selection of station engraving for multi-tooth electrodes
  13. Optimization of BUG in editing properties of special-shaped electrodes

2.0.2.5 (2025-08-28)

  1. Added electrode list
  2. Added the function to save the table layout on the interface

2.0.2.4 (2025-08-25)

  1. Added engraving deletion function
  2. Optimized the issue of missing processing methods when importing other electrodes
  3. Added multi-tooth electrode attributes
  4. Enabled drawing generation for multi-tooth electrodes
  5. Added contact surface analysis for multi-tooth electrodes

2.0.2.3 (2025-08-20)

  1. Added angle marking to the discharge diagram
  2. Optimized error prompts for benchmark table mounting
  3. Added interface layout saving function
  4. Optimized angle marking for inclined tops
  5. Optimized the selection of part centering surfaces in the discharge diagram

2.0.2.2 (2025-08-18)

  1. Optimized errors in material list submission
  2. Optimized the electrode import interface and electrode analysis interface
  3. Added upload error prompts
  4. Optimized the material loss issue when modifying electrode information

2.0.2.0 (2025-08-15)

  1. Added prompts for checking electrode datum planes during drawing generation
  2. Added prompts for checking tool number = 0 in the program list
  3. Optimized the editing of benchmark tables for special-shaped electrodes

2.0.1.9 (2025-08-14)

  1. Added mirror electrode function
  2. Added discharge drawing generation for electrodes with multi-station, multi-part, and multi-coordinate system

2.0.0.4 Update

  1. Optimized attribute prompts for special-shaped electrodes
  2. Added checks for initial mold numbers and part numbers
  3. Added an independent button for electrode contact surfaces

2.0.0.2 Update

  1. Optimized benchmark table stretching
  2. Added electrode contact surface analysis to electrode drawing generation
  3. Optimized the omission of coordinate saving for shared electrodes
  4. Fixed the bug where the material preparation length direction was set to X dimension
Last Updated: